Supply and Install Split System Air Conditioner
The Project: Remove and decommission the current air conditioning system and supply and install a new ActronAir split system air conditioner
The residential client called wanting a quote on a new air conditioning system to replace the existing system as it was breaking down and not performing properly.
Project Details
- Client – Residential
- Property Type – 2-storey Residential Brick and Timber House
- Location – Windale, NSW
- Task – Decommission and remove the current air conditioner and replace it with a new ActronAir split system air conditioner
The Solution
We made our inspection of the house and the room where the air conditioning unit was to be used. Due to the size of the room, we determined that an ActronAir WRE035CS/WRC035CS split system would be suitable. This unit provides 3.5kW of power for cooling and 3.7kW of power for heating.
Installing the new air conditioner
The first task was to remove and decommission the air conditioner that had served the client well for several years. The indoor unit was hung high on the wall and the outdoor unit sat three metres off the outside brick wall. We also had to remove all the wiring.
Both the indoor and outdoor units were to be attached to where the previous units had been positioned. The old system would be taken back to the workshop and be broken down for spare parts.
Electrical Fitting Windale
We employ certified electricians who comply with industry standards. When we decommission and install a new air conditioner the wiring must be connected to the power board by a qualified electrician. Once the indoor and outdoor units were in place and all the cabling was running from the units the electrician connected the wires to the power board. A pre-test was carried out that isolated the systems to make sure all the electrical circuits were performing positively.
Controlling the ActronAir air conditioner
The ActronAir wall mounted split system air conditioner is part of the Serene series. The handheld remote control is battery operated and has multiple features to gain the optimal experience from the A/C.
- White backlight
- Easy to read display
- Timer
- Fan mode
- Louvre control
- ECO function
- Boost mode
- LED display
- Set humidity
A wall mounted control is also available.
ActronAir WRE035CS/WRC035CS Split System Specifications
- Brand – ActronAir
- Model – WRE035CS/WRC035CS
- Mount – Wall
- System – Split
- kW Size – 3.5kW Cooling
- kW Size – 3.7kW Heating
- Room – Small room area
ActronAir Indoor Unit Features
Designed to suit your décor
With a modern light gloss finish and discrete tight lines, Serene’s premium and contemporary styling is sure to complement all décors.
Easy reading
A concealed LED display provides easy to read temperature settings when you need it, and a clean uncluttered finish when you don’t.
Set and forget
Serene allows for the timer to be set in half hour increments. Adjust the timing of your comfort to automatically turn the system off or on to conveniently suit your needs and maximise energy savings.
ActronAir Outdoor Unit Features
Stops ice build up on the outside unit
When the temperature drops outside in Winter, Serene incorporates an intelligent defrost function to prevent freezing and ensure smooth operation in conditions as low as -25°C.
Health – Self Clean Mode
When you turn on Self Clean, a four-stage cycle that minimises dust accumulation and mould development is used by the interior unit to clean itself. By automatically freezing and quickly thawing the ice, cutting-edge technology removes dust, mould, and oil that can lead to odours when they stick to the evaporator.
The internal wind wheel then continues to run in order to blow-dry the evaporator, stopping the formation of mould and maintaining optimal internal cleanliness and performance.
